Low Energy Cost Servo System Mould Injection Machine Manufacturer in China with New Design Tech

Product Details

Low Energy Cost Servo System Mould Injection Machine Manufacturer In China With New Design Tech

Why Choose Low Energy Cost Servo System Mould Injection Machine:

  1. Can be installed programmable computer control, to achieve full line of intelligent.

  2. Extrusion, high efficiency.

  3. Using the famous server driver, especially the most efficient closed-loop computing solution.

  4. Save 30% -80% of the energy, to bring you outstanding economic benefits.


Description for Servo System Mould Injection Machine:

Brief Introduction :

Adopting Europe technology,hydraulic unit adopts proportional pressure and flow control,the pressure and the speed can be adjusted,stable movement curve and gentle shock,the computer is imported from Industry family. The LCD displaying screen with high clarity has Chinese and English language to use. Close-loop PID temperature control with the advantage of high precision. The operating table of the injection moulding machine have two safety, one is machine safety, another is electrical safety, that ensures the operators’s safety. 


Standard equipment : 
 1) Double cylinder balancing injections 
 2) High-torque oil-motor pre plasticizing 
 3) Five pivots minus relief angle, double toggles, machine hinge mold locking 
 4) Cabinet-type holder integrates the mold plate 
 5) Oil motor driven gear mold adjusting 
 6) Storage-type grease lubricating 
 7) Pressure and flow whole-proportion running 
 8) High-performance, low-noise oil pump 
 9) Multi-step pressure and speed adjusting 
 10) High-precision position linear transducer 
 11) Digital memory for mold group


Component Parts:

  • Injection unit: 
     1) Four injection pressures and speeds with three additional pressures and speeds 
     2) Suck back function 
     3) Cold start protection 
     4) Pre-suck back function 
     5) Linear displacement transducer accurately monitor injection position, providing optimum. injection accuracy and control 
     6) Temperature control 
     7) Heating Status indication

  • Clamping unit: 
     1) Three clamp close and open pressures and speeds 
     2) Mold protection function 
     3) Hydraulic ejector stroke controlled by transducer 
     4) Automatic hydraulic die-height adjustment driven by planetary gears system 
     5) Adjustable support under moving platen 
     6) Automatic high pressure toggle lubrication with low oil level alarm 
     7) Mechanical, electrical and hydraulic safety interlock devices 
     8) Linear displacement transducer controls clamping position

  • Other parts: 
     1) Independent core in / out pressure and speed 
     2) Hydraulic unscrewing sequence 
     3) Hydraulic oil high temperature alarm 
     4) System pressure gauge 
     5) Shot counter and reset function 
     6) Malfunction alarm light 
     7) Self-diagnostic function 
     8) Emergency stop buttons placed both front and rear of the machine to provide easy access


Photos Show for Servo System Mould Injection Machine :

Low Energy Cost Servo System Mould Injection Machine Manufacturer in China with New Design Tech.jpg

Low Energy Cost Servo System Mould Injection Machine Manufacturer in China with New Design Tech.jpg

Low Energy Cost Servo System Mould Injection Machine Manufacturer in China with New Design Tech.jpg

Low Energy Cost Servo System Mould Injection Machine Manufacturer in China with New Design Tech.jpg

Low Energy Cost Servo System Mould Injection Machine Manufacturer in China with New Design Tech.jpg

Technical Parameters:

Main specification of HXF158

Screw A

Screw B

Screw C

Screw D

Injection Unit

Screw Diameter

mm

38

42

45

48

Screw L/D Ratio

L/D

24.3

22

20.5

19.2

Shot Volume (theoretical)

CM³

226

277

318

361

Injection Weight (PS)

g

206

252

289

328

Injection Rate

g/s

100

126

144

163

Plasticizing Capacity

g/s

13

15

20

24

Injection Pressure

MPa

248

203

177

155

Screw Speed

rpm

200

Clamping Unit

Clamp Force

KN

1580

Toggle Stroke

mm

400

Max. Mold Height

mm

500

Min. Mold Height

mm

150

Space Between Tie Bars (W×H)

mm

460X410

Ejector Force

KN

33

Ejector Stroke

mm

130

Ejector Numbers

n

5

Others

Max Pump Pressure

MPa

16

Pump Motor Power

kW

15

Heater Power

kW

10.05

Machine Dimension (L×W×H)

m

5.0×1.32×1.93

Machine Weight

t

4.5

Oil tank capacity

L

253

Machine Component List :

No

Items

Origin/Brand

1

Controller

Taiwan   Techmation 7 Color screen

2

Vane   pump

America   Sunny

3

Main   Directional valve

America   Vickers

4

Proportional   valve

Taiwan   Dofluid / HNC

5

Hydraulic   Five-star motor

Italy   Intermot / Zihyd

6

Core   puller

One   set

7

Linear   transducer

America   / France

8

Electric   equipment

Japan   Omron / Fuji

9

Lubrication

Automatic

10

Main   airproofelement

Taiwan   / Japan

11

Electric   motor

Beijing   / Zhongda



Main Buying Procedures :

Enquiry: contact us by email, phone call, fax, Instant tools (Trademanager, MSN, Skype) and let us know your enquiry.

Discussion: specify the items you desire, confirm specification; OEM/ODM consultation.

Quotation: Prices offered and accepted.

Place order as per contract or discussion.

Proforma invoice: offered to double confirm the order for both-side records.

Payment settled.  

Order completed under our arrangement.

Goods shipped as per contracted term.

Goods arrive at local port or warehouse, depending on contracted term.


We warmly welcome all the clients send quotation to us,upon you send the quotation,i will reply you in 24 hours.

Feedback