Small Scale Factory CGFA8-8-3 Spring Water Filling Machine Full Automatic Rotary Equipment with Lower Price

Small Scale Factory CGFA8-8-3 Spring Water Filling Machine Full Automatic Rotary Equipment with Lower Price
Chat Now
Product Details

Product Introduction of the CGFA8-8-3 Spring Water Filling Machine


1.Working principle:
When bottles are sent to the machine by conveyor continuously, they firstly are deliveried to the receiving wheel by air-slide conveyor and then to washing part.
The bottle clamps hold the bottles and trun over 180° to wash, then return back to their original position after enough washing and drying. The bottles are sent to the middle thumb wheel 1 and to the filling part to be filled, then moved by middle thumb wheel 2 and reach to capping part to be capped, at the same time, cap trimmer sends caps to the top of the bottles and capper screws caps.
Bottles are sent to the conveyor chain by the out stirring wheel to next working position.

2.Main characteristic:
Adaptability is wide: Because all parts have a height adjust device, the height of bottle can be adjusted within the range of 150-340mmthe diameter can be adjusted within the range of 50-110mm.
Production capacity can be adjusted continuously: using a frequency inverter to control the speed. So it works more reliable.
This machine has a complete set of reliable protection system to protect the machine itself and the operator.


新建 12.jpg

Product Parameter of the CGFA8-8-3 Spring Water Filling Machine


Model

CGFA

8-8-3

CGFA

12-12-6

CGFA

18-18-6

CGFA

24-24-8

CGFA

32-32-10

CGFA

40-40-12

CGFA

50-50-15

Washing No

8

12

18

24

32

40

50

Filling No

8

12

18

24

32

40

50

Capping No

3

6

6

8

10

12

15

Capacity(500ml)

2000BPH

4000BPH

6000BPH

10000BPH

12000BPH

16000BPH

24000BPH

Installed Capacity

2kw

3.5 kw

4kw

4.8kw

7.6kw

8.3kw

9.6kw

Overall size

2000*1600

*2400

2450*1800

*2400

2650*1900

*2400

2900*2100

*2400

4100*2400

*2400

4550*2650

*2400

5450*3210

*2400

Weight

2 T

2.2 T

3 T

4 T

8 T

12 T

18 T

 

Diameter

Φ 50-110mm

 Bottle Height

150-340mm 

Volume

200-2000ml



Product Feature of the CGFA8-8-3 Spring Water Filling Machine


1. Each water filling machine element tha contacts with the liquid is made of high quality Stainless steel 304, if needed,SS 316 is also available.

2. The water filling machine adopts bottle neck holding transmission technology to realize fully automatic rinsing,  filling and capping.

3. Most elements of the electrical system use famous international brand, such as Mitsubish, Omron brand.

4. The water filling machine obtain the advantages of good abrasive resistance,high stability,low failure rate, etc. The quality of the equipments reaches the international advanced level.

5. Advanced technologies, human-machine interface touch screen and PLC program control are adopted in this machine.

6. Nozzles in the grab can guarantee the complete wash of the interior of the bottle.

7. Easy to operate, save the cost of workers



Product Detail of the CGFA8-8-3 Spring Water Filling Machine


Function : 

(1) The water bottling machine has three functions for bottle rinsing, filling and capping, which are composed in one body of the machine . The whole process is full automatic.
(2)Adopt air conveyor system with high efficient filter to feed bottle, this can keep the inside of the filling machine clean

    With bottle neck holding in the whole course and protect bottle block device.

8-8-3 inside.jpg


Washing Part 3 in 1 PET bottle washing filling capping machine is a rotary bottle washing machine, mainly used for beverage, water and other products, the use of new bottles. And then the bottle sent to the filling machine for product filling.

8-8-3 washing.jpg


Filling Part Filling the part to fill the material into the wash bottle sent by the bottle.Filling the part to fill the material into the wash bottle sent by the bottle. Filling machine uses gravity filling. Machine PLC automatic control, fault online display, such as blocking the bottle, missing and so on. The key components and electrical components of this machine are imported products. MITSUBISHI, OMRON, SCHNEIDER imported components

filler&capper.jpg


Capping Part The screw cap will be screwed onto the bottle of the product that has been filled with the lid and the conveyor chain is sent to the rear process.

capper detail.jpg


Product Deliver and Certification of the CGFA8-8-3 Spring Water Filling Machine


Delivery & Packing
Delivery Time: 30-45 days after get your deposit.
Coming Document:
1) Machine Quality Guarantee
2) Complete set install & maintain instruction Book in English language
3) Complete Document for customer to clear its custom

Packaging Details

The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

111111111111111111.jpg

99999.jpg99999.jpg


Product Service of the CGFA8-8-3 Spring Water Filling Machine


The sample service

1.we can send you the video of the running machine.
2.you are always welcome to come to visit our factory, and you may see the operation of the machines here . We will make the arrangement to pick you up when you come .
3.If we get the permission of the customer who has brought the machines from us ,we can tell you their contact information, you can go to visit their factory.

Customized service
1.we can design the machines according your requirements(material ,power,filling type,the kinds of the bottles, and so on).
2.at the same time we will give you our professional suggestion .

After-sales service
1.we will provide the bill of load on time to make sure you can get the machine quickly
2.when you finish the Preparation conditions ,our engineer will go to your factory for the installation, testing and also training .
3.we provide one year warranty with spare parts free.

77777.jpg

FAQ

f.jpg

Factory

11111111111111111111111111.jpg

Feedback