Production Feature of the Mineral Water Washing Filling and Sealing Machine
1.Working principle: When bottles are sent to the machine by conveyor continuously, they firstly are deliveried to the receiving wheel by air-slide conveyor and then to washing part. The bottle clamps hold the bottles and trun over 180° to wash, then return back to their original position after enough washing and drying. The bottles are sent to the middle thumb wheel 1 and to the filling part to be filled, then moved by middle thumb wheel 2 and reach to capping part to be capped, at the same time, cap trimmer sends caps to the top of the bottles and capper screws caps. Bottles are sent to the conveyor chain by the out stirring wheel to next working position.
2.Main characteristic: Adaptability is wide: Because all parts have a height adjust device, the height of bottle can be adjusted within the range of 150-340mm, the diameter can be adjusted within the range of 50-110mm. Production capacity can be adjusted continuously: using a frequency inverter to control the speed. So it works more reliable. This machine has a complete set of reliable protection system to protect the machine itself and the operator.
3.Why our machine is better than other similar machines?
1. Each water filling machine element tha contacts with the liquid is made of high quality Stainless steel 304, if needed,SS 316 is also available.
2. The water filling machine adopts bottle neck holding transmission technology to realize fully automatic rinsing, filling and capping.
3. Most elements of the electrical system use famous international brand, such as Mitsubish, Omron brand.
4. The water filling machine obtain the advantages of good abrasive resistance,high stability,low failure rate, etc. The quality of the equipments reaches the international advanced level.
5. Advanced technologies, human-machine interface touch screen and PLC program control are adopted in this machine.
6. Nozzles in the grab can guarantee the complete wash of the interior of the bottle.
7. Easy to operate, save the cost of workers
Production Detail of the Mineral Water Washing Filling and Sealing Machine
Function : (1) The water bottling machine has three functions for bottle rinsing, filling and capping, which are composed in one body of the machine . The whole process is full automatic.
(2)Adopt air conveyor system with high efficient filter to feed bottle, this can keep the inside of the filling machine clean With bottle neck holding in the whole course and protect bottle block device.
Washing Part ·All 304 stainless steel rinser heads, water spray style inject design, more save water consumption & more clean ·304 Stainless steel Gripper with plastic pad, ensure minimal bottle crash during washing ·304 stainless steel washing pumps Filling Part ·Filling temperature is adjustable. ·Center 304L stainless steel filling nozzles designed to achieve maximum flow and minimum bottle deformation during filling. ·All 304 stainless steel contact parts and liquid tank, fine polishing, no dead ends, easy to clean. ·No bottles without filling. Capping Part Place & capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping ·All 304stainless steel construction ·No bottle no capping, ·Automatic stop when lack of bottle
Production Deliver and Certification of the Mineral Water Washing Filling and Sealing Machine
Delivery & Packing Delivery Time: 30-45 days after get your deposit. Coming Document: 1) Machine Quality Guarantee 2) Complete set install & maintain instruction Book in English language 3) Complete Document for customer to clear its custom
The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.