500ML Bottle Purified Water Filling Machine China Factory Low Price Fully Automatic 3 in 1 Equipment

500ML Bottle Purified Water Filling Machine China Factory Low Price Fully Automatic 3 in 1 Equipment
Chat Now
Product Details

Production Introduction of the Purified Water Filling Machine

Working principle:
When bottles are sent to the machine by conveyor continuously, they firstly are deliveried to the receiving wheel by air-slide conveyor and then to washing part.
The bottle clamps hold the bottles and trun over 180° to wash, then return back to their original position after enough washing and drying. The bottles are sent to the middle thumb wheel 1 and to the filling part to be filled, then moved by middle thumb wheel 2 and reach to capping part to be capped, at the same time, cap trimmer sends caps to the top of the bottles and capper screws caps.
Bottles are sent to the conveyor chain by the out stirring wheel to next working position.

Production Parameter of the Purified Water Filling Machine

Model

CGFA

8-8-3

CGFA

12-12-6

CGFA

18-18-6

CGFA

24-24-8

CGFA

32-32-10

CGFA

40-40-12

CGFA

50-50-15

Washing No

8

12

18

24

32

40

50

Filling No

8

12

18

24

32

40

50

Capping No

3

6

6

8

10

12

15

Capacity(500ml)

2000BPH

4000BPH

6000BPH

10000BPH

12000BPH

16000BPH

24000BPH

Installed Capacity

2kw

3.5 kw

4kw

4.8kw

7.6kw

8.3kw

9.6kw

Overall size

2000*1600

*2400

2450*1800

*2400

2650*1900

*2400

2900*2100

*2400

4100*2400

*2400

4550*2650

*2400

5450*3210

*2400

Weight

2 T

2.2 T

3 T

4 T

8 T

12 T

18 T

 

Diameter

Φ 50-110mm

 Bottle Height

150-340mm 

Volume

200-2000ml

Production Feature of the Purified Water Filling Machine

2.Main characteristic:
Adaptability is wide: Because all parts have a height adjust device, the height of bottle can be adjusted within the range of 150-340mmthe diameter can be adjusted within the range of 50-110mm.
Production capacity can be adjusted continuously: using a frequency inverter to control the speed. So it works more reliable.
This machine has a complete set of reliable protection system to protect the machine itself and the operator.

 

3.Why our machine is better than other similar machines?

1. Each water filling machine element tha contacts with the liquid is made of high quality Stainless steel 304, if needed,SS 316 is also available.

2. The water filling machine adopts bottle neck holding transmission technology to realize fully automatic rinsing,  filling and capping.

3. Most elements of the electrical system use famous international brand, such as Mitsubish, Omron brand.

4. The water filling machine obtain the advantages of good abrasive resistance,high stability,low failure rate, etc. The quality of the equipments reaches the international advanced level.

5. Advanced technologies, human-machine interface touch screen and PLC program control are adopted in this machine.

6. Nozzles in the grab can guarantee the complete wash of the interior of the bottle.

7. Easy to operate, save the cost of workers

Production Detail of the Purified Water Filling Machine

Functions:

(1) The water bottling machine has three functions for bottle rinsing, filling and capping, which are composed in one body of the machine . The whole process is full automatic.

(2)Adopt air conveyor system with high efficient filter to feed bottle, this can keep the inside of the filling machine clean.
    With bottle neck holding in the whole course and protect bottle block device.

1.Washing part
The bottle is blew into the bottle shifting wheel, when the flushing clamp reaches the bottle neck, the jaw will clamp the bottleneck, under the guidance of the rail, the clamp will turn the bottle 180°into an upright position, through second bottle pusher into the filling position.

2.Filling part

The filling part is manly composed of a filling valve and filling transmission parts. The washed bottle reaches the filling position via the bottle shifting wheel. In the mean time, the bottle clamping plate of the filling machine will clamp the bottle and move up to seal the bottle, filling valve will open, send the liquid into the bottle. When the liquid level of the bottle reaches the trachea of the filling valve, the filling will stop.

3.Capping part

The capping part consists of screw heads, capping transmission part, a sorting part and an under cover tube parts. The bottle which has finished filling will enter the capping position via the driving wheel. Bottles that have finished capping will be transported by the bottle pusher to the conveyor belt.

Production Deliver and Certification of the Purified Water Filling Machine

Delivery & Packing
Delivery Time: 30-45 days after get your deposit.
Coming Document:
1) Machine Quality Guarantee
2) Complete set install & maintain instruction Book in English language
3) Complete Document for customer to clear its custom

Packaging Details

The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

 

FAQ

Factory

Feedback